vcds lite port status ok interface not found

This will allow you to set the com port to Com1 The cable should now connect to the car. It will probably say USB serial port (COM3 or somesuch) open up it by double clicking, go to the port settings tab and click on advanced.

Now go into control panel open up or navigate to system/hardware/device manager/ports. What you need to do is plug in the cable to your laptop. Would be very grateful for any suggestions. With the dongle plugged in (the led lights up) and turning on the ignition to the first setting, clicking on the OBD-II returns 'Interface Not Found!'Īs I mentioned, the CD-ROM was cracked when delivered - although no sign of any damage to the Jiffybag or to the cable and dongle. However, the above happens even if the cable is unplugged. I've discovered that if I select COM3 and then press Test, the window says:

Also, in the 'Add or Remove Programs' facility, the 'FTDI USB Serial Converter Drivers' is listed, so this looks encouraging. If I unplug the cable from the USB port, then the report says 'Ross-Tech Interface Not Found!' So, this seems to suggest something is working OK. I run XP, so downloaded the driver 2.00.00 However, I still can't get it to run: Having plugged in the cable, On the VAG-COM options menu, selecting USB and 'Test' returns The vendor had e-mailed me directing me to the FTDI website to download the drivers - you were correct! I had opened the dongle and the chip is an FTDI 232BL. Hi Lee, Thanks for your helpful comments.

Vcds lite port status ok interface not found